Home > Industry news

How to operate Tape wrapping machine WPM-303

Tape wrapping machine
User Manual
 Please carefully read the Manual before using to correctly and safely use the product

Introduction
Thank you for selecting the product first!
Before using the product, please carefully use the Manual and correctly use the product after fully understanding the Manual to ensure the safety of related personnel and device. 
About the Manual
The manual mainly describes the method to wrap parcels with harness tape. The Manual has two versions, a physical version electronic version, and users can ask the dealer for the electronic version.
Use range
The Manual provides operation instructions for the product to prompt product development.
Target 
Common operator
How to Use the Manual
The Manual describes the operation process, details, and skills of the numerical control tape wrapping machine from easy to difficult step by step.
Contents

1. Introduction…………………………………………………………4

2. Product parameter………………………………………………5

3. Startup step……………………………………………………6

4. Tape installation…………………………………………………7

5. Function Introduction……………………………………………8

6. Warranty card………….…………………………………………10

1. Introduction

The chapters mainly describe wrapping features and the range of applications of numerical control tape wrapping machines as shown in the figures below.

Point wrapping (stop wrapping)

Tight wrapping

1/2 overlap wrapping

 Border wrapping

Transposed wrapping

Branch wrapping

Close wrapping

 Spaced wrapping
2. Product parameter

Operating mode: touch screen, foot pedal
Working mode: full wrapping, point wrapping, multi-segment wrapping
Power supply: AC110V~AC220V
Air pressure: ≥4P
Wrapping length: infinite
Wire diameter: 3MM-40MM
Tape Specifications: inner diameter: 38MM, outer diameter: ≤¢140MM, width: ≤20MM (in case of another tape size, please customize tape holder as required)
Tape type: PVC / lint/acetate tape (no interleaving paper), etc.
Working temperature: 0-45℃
Humidity: 10-90%RH (no condensation)
Cooling mode: Natural wind
Max frequency: 12R/S

2. Startup step

1. Check whether the machine is mounted on the table firmly
2. Turn on the main power switch
3. Touch the screen to enter the system
 
Welcome to use
The second-generation tape-wrapping machine
Enter the system
4. Click the screen to select full wrapping, point wrapping, and multi-segment wrapping according to wrapping mode.

Intelligent tape-wrapping machine
Width Running speed Number of circles Wire diameter
Wrapping mode
Full wrapping Point wrapping Multi-segment wrapping
Parameter interface Manual interface Multi-segment settings System parameter Tape loading

4. Tape installation
1 Press “Reset”
 
2 Press “Tape loading” on the screen
 
Intelligent tape-wrapping machine
Width Running speed Number of circles Wire diameter
Wrapping mode
Full wrapping Point wrapping Multi-segment wrapping
Parameter interface Manual interface Multi-segment settings System parameter Tape loading
3 machine head rotates to tape changing position automatically
 
When installing, install the tape with the head upward in the tape holder, pull the head into the gap, press “Reset” after installing, and confirm that the head is at the operation position.
4. Function description
Operation interface
 
Intelligent tape-wrapping machine
Width Running speed Number of circles Wire diameter
Wrapping mode
Full wrapping Point wrapping Multi-segment wrapping
Parameter interface Manual interface Multi-segment settings System parameter Tape loading
Full wrapping
Select “Full wrapping”, tread on the foot pedal to start operating, and press “Wheel closure switch”, the machine operates at full speed and stops operation when the foot pedal is released.
Point wrapping:
Select point wrapping, enter the number of circles you want and tread on the foot pedal to start operating, the machine will not stop until the number of circles reaches without treading on the foot pedal.
Multi-segment wrapping
Select “Multi-segment wrapping”, and then press “Multi-segment setting”. 50 segments are provided for setting. You can set it according to the length of the wire branch. You should set it as required and the remaining is left. Tread on the foot pedal, and the machine will stop automatically after the first segment is completed, and then you should tread on the foot pedal again and the machine will complete the second segment operation, and so on. After the last segment is completed, you should press “Reset” to start the production of a second line.
Tape width:
The tape width is 20MM generally; the width setting will directly affect the wrapping density.
The smaller the width is, the larger the overlap surface is. The bigger the width is, the smaller the overlap surface is.
Running speed:
The maximum speed is 5, the minimum speed is 1.
Several turns for point wrapping:
Set the number of circles for point wrapping
 Wire diameter:
Edge size can be adjusted according to the wire diameter for two wheels.
Parameter setting:
The parameter setting is only available for the administrator
Manual interface (you can set it as required):
 
Motor Forward Reverse Reset Pole selection Enable pole
Roller Forward Reverse Reset Safety gate selection Enable safety gate
Wheel Close Open Reset Safety shield off-delay 9.9s
Wheel selection Enable wheel
Auto interface Close to wire diameter position Full wrapping high-speed delay 9.9s
Multi-segment setting
 
Segment 1 Segment 8 Segment 15 Number
Of
segments
Segment 2 Segment 9 Segment 16
Segment 3 Segment 10 Segment 17
Segment 4 Segment 11 Segment 18
Segment 5 Segment 12 Segment 19
Segment 6 Segment 13 Segment 20 Auto interface
Segment 7 Segment 14 Segment 21 Next page

Warranty Card

Customer name:                                                            Model:
Customer address:                                                        Customer telephone:
Purchase date:                                                               Contact:
I. Warranty clauses:
1. Please carefully fill in the Warranty Card when purchasing and returning to our Company to facilitate our maintenance.
2. The machine enjoys free maintenance within one year from the purchase date under the conditions of normal use and the customer should actively assist our Company in maintenance.
3. The customer should pay the cost of accessories in case of accessory replacement out of the warranty period.
4. Within the warranty period, the customer should assume traveling expenses incurred by maintenance caused by human factors. 
II. Within the warranty period, free maintenance is not available in the following situations:
1. Cutters and wheels are not covered by the warranty.
2. The customer cannot prove that the machine is purchased from our Company.
3. The customer disassembles or modifies the machine without authorization.
4. The fault is caused by falling, collision, and improper voltage.
5. The fault is caused by a natural disaster.

  • Copyright @ 2003-2024 XIAMEN JINGWEI TECHNOLOGY CO., LTD.
  • E-mail sales@cablecutting.net npsales@126.com
  • Contact: Mr. Kevin, Ms. Donna
  • Tel:+86-0592-8628902 Mobile:+86-18965153335 Skype: kevin201166 Fax:+86-0592-6065010